From: route@monster.com
Sent: Monday, October 26, 2015 10:58 AM
To: hg@apeironinc.com
Subject: Please review this candidate for: drive tseter
This resume has been forwarded to
you at the request of Monster User xapeix01
|
|||||||
|
|||||||
|
|
|
||||||
|
||||||
|
Cecelia Books Cecelia.Books@Gmail.com Cell:
540-560-5962 Summary: Market Lead and RF engineer
for design, optimization, project management and training skills. RF
Experience in all aspects of a site builds from design, site development
process, integration and optimization. Experienced in vendors of
Ericsson and ALU. Optimization for multi-band FDD LTE for capacity and
load balancing. Design:
Extensive experience in GSM/CDMA and LTE ·
Team Lead for
small cells and repeaters for entire market (PA, VA, WVA and MD) ·
Designed over
2000 sites for Dobbs Communication project at Huawei for UMTS and CDMA
overlay. ·
Design UMTS
clusters for Mexico and Brazilian projects. ·
Design WiMAX
projects for micro-cell for LA market for Clearwire and Canadian Power ·
Sole designer
of LTE for over 700 sites for Cox Communication to meet coverage,
throughput and population count/capacity expansion. ·
Design Market
Lead for Sprint Nextel for Atlanta Market for CDMA and iDEN for existing
market of 800 sites on air. ·
Team
lead for site modifications during frequency reallocation for Southeast
region (GA, Birmingham, AL and New Orleans, LA ·
Design tools
used: Planet, Wizard and Atoll. ACP: Capesso, ACTIX and Optimizer Optimization:
GSM/CDMA and FDD LTE ·
Optimize
engineer for 100 sites in PA market for tri-band LTE and dual band CDMA ·
DEN/CDMA
lead-optimizer in So-Cal and Atlanta market. o
Recognized in
quarterly award for improvements to West LA area by Sales Team o
Optimized
sites for new builds to cluster optimization ·
Optimized
areas for KPI’s for UMTS project in Brazil/Mexico and Dobbs Communication
project ·
Optimized
over 700 sites for LTE for KPI’s for Cox Communications Project management and Leadership:
Extensive experience in working in national, regional and market projects. ·
3G lead for
Sprint Network Vision Project at Ericsson and acting ‘co-lead’ for the
Memphis and Kentucky Markets for implementation of Sprint New Vision project
for 3G and 4G. ·
Additional
team lead experience: o
Team lead to
design over 2000 sites for Dobbs Communication project for Huawei for
CDMA/UMTS and wrote Design Response to Request for Proposal. o
POC for
regional markets for a site modification projects in Southeast region
(Atlanta, Georgia, Alabama and New Orleans) for design, optimization and
implementation at Sprint/Nextel: o
Project lead
for MPE reports for Sprint Nextel for entire South East Region. o
Team Lead for
So-Cal West Los Angeles area for associate engineers and field technicians. o
National lead
for implementation of traffic shifting project and implementation of an ACP
tool. Team Lead for Philadelphia Frequency Planner for Spectrum Reduction
Project at T-Mobile (formerly Omnipoint o
Regional lead
for site modification project for Atlanta, Georgia, Alabama and Louisiana. Training Lead: Developed and deployed
an in-house training for technicians and associate engineers for Sprnt.
Design lead to train contractors at Huawei for the use of Atoll. Lead
tester for ACTIX for directors and VP’s at the national level and implementation
of tool in the southeast region including developing MOP’s for regional
engineers. Education: BSEE from Pennsylvania State
University. Graduated in 1996. Project Management Certification from
Phoenix University in 2005. Employment: Shentel (Affiliate of Sprint) RF Engineer
III in Edinburg VA 12/13/2014 to 6/5/2015 Responsibilities: Team Lead for PA market
and system performance for 100 sites in PA for dual band and tri-band FDD LTE
Team Lead to ensure KPI and statistics were
optimized for DCR/Blocking for CDMA and KPIs for LTE RF lead for design and implementation of
small cells (ALU MCO's) and in-building repeater. Database Manager for Planet to ensure
accurate count of sites on air, in development and search rings.
Responsible for reporting quarterly population counts for FCC submissions. Glow Networks: Market Support Lead
Consultant to Ericsson in Atlanta, GA 10/2011 to 12/10/2014 Responsibilities: 3G Launch Lead for
Memphis and Kentucky market to support Sprint Network Vision Project. Supported
market lead for: ·
Design:
Reworded design after ACP-Capesso runs to ensure coverage/Ec/Io and access
failure/drop calls optimized for the Memphis market for Azimuth and DT tilt
changes. ·
Hardware
dimensioning and RFDS generation for a five year predications for site
migration for carrier counts, spectrum limited sites and allocation of
equipment on site to site basis. ·
Liaison to
site development to ensure design was implemented correctly to ensure spacing
allowance for different technologies, proposing new design to construction to
accommodate RRU’s placement. Updating database and RFDS’ to reflect
changes and ensure new design was accurate. Submitted alternative
designs to Sprint for structurally challenged/stealth designs based on Planet
simulations, market knowledge and Sprint’s design criteria. ·
Responsible
for datafill parameter and ip allocation for CDMA and EVDO Daisy change and
AEM configurations and script generation. Submitted scripts for new
builds and trained engineers for the day to day scripting requirements of the
market. Ensured sites were built with correct configuration per
spectrum allocation and budget allocation. ·
Worked
directly with integration manager for site migrations from BTS to RBS with
RRU configuration for 3G-CDMA for 800/1900 MHz and 4G-LTE 1900
MHz First point of contact for escalation for pre-and
post-launch of site migration (and supporting migrations as request by
integration manager). ·
For site
migrations, ensured functionally, follow through with optimization to pass No
Harm KPI’s submittals and cluster acceptance KPI’s. Functionality
testing included review of stats of sites, hardware alarms, neighbor list and
parameters ·
Optimization
included downtilts, neighbor list and site parameters. Cluster acceptance review
to ensure that cluster was meeting Sprint’s KPI’s and optimization of
clusters as needed. Huawei Communications: Supporting Sales Sr.
RF Engineer 07/2010 to 6/2011 (consultant to hire from
7/2010 to 12/2010 for T-Force) Responsibilities: Supported sales
with response to RFP’s for new and existing clients. Design leader of
project schedule, site design and presentation to client. Responsible for
antenna selection, design specifications, site selection based on master site
database, methodology, coverage thresholds and link budget, propagation
modeling selection and population count for to estimate hardware
dimension/capacity. Designed and optimized new and existing network
architecture of WiMAX, UMTS and LTE for overlay networks such as CDMA/UMTS and
CDMA/LTE. 4G Unwired: UMTS Design Engineer,
Consultant in Melbourne Florida and Mexico City, MX. 4/2010 to 5/2010 Responsibilities: Consultant as a
cluster design engineer for two areas: Brazil and Mexico. Design
was to meet KPI’s on specific morphologies from urban, commercial and
highways. Worked directly with local engineers and presented design to
director of engineering. Primary responsibility was to design for
coverage and capacity growth for a five year plan utilizing existing and new
cell sites. Sprint Nextel: RF I to RF III for
IDEN and CDMA in Irvine, CA and Atlanta, GA 7/1997 to 9/2009 Responsibilities: Duties included increase
from cluster design and optimization engineer to SME for iDEN and CDMA.
Lead various projects from drive testing teams, propagation modeling,
software testing and implementation, team leader and initiated training
program. Worked within all faucets of RF engineer from zoning meetings,
site design, bringing sites on-air, optimization, frequency and
site-trouble-shooting. Lead in optimization for recommending parameter
changes to improve network quality, coverage and KPI’s. Lead a team of
associate engineers and technicians for the West Los Angelus area to support
site design, site optimization and trouble-shooting. Regional lead for
site database support, site modifications and close-out packages. Tools: MapInfo, Excel, Access
(Database creation and management), Planet, Atoll, Wizard, Capesso, ACP
ACTIX, Optimizer ACP tool, Windcatcher, Cockpit, Qtrack (script generation),
MapInfo. OMP for ALU. |
|
|
||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Languages: |
Languages |
Proficiency Level |
|
English |
Fluent |
|
|
|